Drains
Hydro Jetting in Kansas City
High-pressure water jetting that scours the pipe wall clean — grease, scale, and roots — not just a hole punched through the clog. Camera pass included.
Pricing: Call now or contact us for a quote on your job.
.PNG&w=3840&q=75)
When Hydro Jetting is the Right Fix
What hydro jetting actually does that a cable can't
A cable (snake) bores a hole through a blockage — water flows again, but the grease, scale, and root film lining the pipe wall is still there, so the clog rebuilds in months. Hydro jetting runs a high-pressure hose with a specialized nozzle down the line; forward jets cut the obstruction and rear-facing jets scour the full inner diameter of the pipe as the hose is drawn back. You get the pipe cleaned to the wall, not a temporary channel through the middle of the problem.
Pressure and nozzle matched to your pipe
Jetting is not one setting for every line. We run full pressure on PVC and sound cast iron, back it down on older clay laterals where high jet force can open an already-marginal joint, and switch nozzles for the job — a penetrating nozzle for a solid grease plug, a rotating nozzle for root mass and hard scale, a flusher for a maintenance rinse. We camera the line first so we're choosing based on what the pipe actually is, not a guess over the phone.
Camera before and after — every time
We run a camera before we jet to confirm the line can take it, and again after so you see the cleaned pipe wall on the monitor with us. That before-and-after is also how we tell the difference between a line that needed cleaning and a line that's structurally failing — if the camera shows cracked or collapsed pipe rather than just build-up, we won't keep jetting it, we'll quote the repair instead.
Maintenance jetting for lines that never fully clear
Some lines don't have a one-time fix. An original clay lateral under a mature Prairie Village or Merriam tree canopy re-roots every season; a busy kitchen or a restaurant grease line reloads no matter how well it's cleaned. For those, a scheduled jetting pass — often once a year, ahead of the holidays — keeps the line ahead of the build-up and out of emergency-backup territory for less than the cost of a single emergency call.
How Hydro Jetting Works
Camera and assess
Run the line first to confirm the pipe material and condition, and that it can take a jet.
Set pressure and nozzle
Match jet pressure and nozzle to the pipe and the blockage — grease, scale, or roots.
Jet the full run
Scour the pipe wall to full diameter on multiple passes, drawing the hose back slowly.
Camera verification
Final camera pass so you see the cleaned pipe wall — and any repair the cleaning revealed.
Hydro Jetting — Frequently Asked
What's the difference between hydro jetting and snaking?▾
A snake (cable) punches a hole through the clog so water flows again; hydro jetting scours the entire inside of the pipe wall clean. For a one-off object clog a cable is the right, cheaper tool. For grease, scale, or repeat root intrusion, jetting removes the underlying build-up so the problem doesn't rebuild in a few months.
Will hydro jetting damage my old pipe?▾
Not when the pressure is set for the pipe. We reduce pressure on older clay and fragile cast iron and won't jet a line the camera shows is structurally failing — that gets a repair quote instead. Done right, jetting is safe on the same old lines a cable clears.
How often should a line be jetted?▾
Most homes only need it when a cable stops holding the line clear. Homes with original clay laterals and mature trees, and commercial kitchens with heavy grease, often go on an annual maintenance jet because the underlying condition — roots, grease — comes back every year.
Hydro Jetting in Your City
Service across the Kansas City metro. Tap your city for local service details.
Need a Plumber Today?
Service across Kansas City. Call or contact us for upfront pricing.
